Locate (Contains) :
Send Email Settings

This task enables you to configure the system for sending a window's information via e-mail when using the Send To button.

To configure the system using the wizard, proceed as follows:
  1. Select the Configure Send Email Settings option from the toolbar *Task*drop-down menu and the Configure Send Email Settings wizard window will be displayed.

  1. Select the *Next*button to continue.

  1. The next window is used to enter the*IP* address or Name*of the SMTP mail server and also the *Port*number to be used. The *Test Setting button can be used to check if the information entered is correct or not. Once the correct information has been entered, select the *Next*button.

  1. The next window is used to enter the send *From*e-mail address and then select the *Next*button.

  1. If the SMTP mail server requires a User*name and *Password, use this window to enter the required information. Once completed select the *Next*button.

  1. The next window is used to enter the e-mail address of the TNA Supplier or the address when Support is required. The Send Test button can be used to send a test e-mail to the address entered to ensure that the information that has been entered is correct. Select the *Next*button.
  2. The next window now enables the settings to be saved by selecting the *Finish*button.
Configure FTP Settings

This task enables you to configure the system for sending a window's information using the FTP option when using the Send To button.

To configure the system using the wizard, proceed as follows:
  1. Select the Configure FTP Settings option from the toolbar *Task*drop-down menu and the Configure FTP Settings Wizard window will be displayed. Select the *Next *button to continue.

  1. Enter in the required FTP Server IP *address and *Port *that are to be used and then select *Next.

  1. Enter the Directory *on the FTP Server where the TNA data is to be saved to and then select *Next.

  1. If a User Name and Password *are required to connect and upload data to the server, enter the information and select *Next.

  1. If Passive Mode is supported select this option and then select Next.

  1. Now that all the required information has been entered, select *Finish *to complete this task.

Updated by Robert de Jager on 28 JUN 2021
Locate (Contains) :